Jogler Level Gauges

Jogler Direct-Reading Level Gages are the simplest, most reliable way to determine the level of liquid in a tank or vessel, because they give you a direct view without compromising the integrity of your process system. Jogler level gages are installed so that the liquid level in the transparent sight tube is always the same as the liquid level inside the tank or vessel. Jogler direct-reading level gages can be used at operating pressures up to 300 psi. For higher operating pressures, use Jogler Magnetic Level Gages.

Jogler Magnetic Level Gages are a safe, economical way to measure and control liquid levels in any application. They are suitable for high temperature and/or pressure, full vacuum, low-specific gravity liquids, and more. Jogler magnetic gages can be used with vessels of almost any size and shape and with any process fluids.

Jogler Magnetic Level Gages have three components:

  • a float chamber
  • a magnetic float
  • an external indicator

The float chamber is made of nonmagnetic material and is attached to the tank or vessel so that the liquid level inside the float chamber and host vessel is the same. Float chambers are available in a wide range of materials and styles. See Float Chamber Styles.

Jogler Direct-Reading Flow Indicators are the simplest, most reliable way to observe liquid or solids flow without compromising the integrity of your piping system. All models are available in either armored styles for protection in exposed locations or lantern styles for 360-degree viewing.

  • Simple, reliable, and maintenance-free
    Jogler flow indicators are simple: the only components (not including mounting hardware) are the armored shield or lantern cage, the sight tubing, and two self-sealing Super-Seal inserts. These products are maintenance-free, because only the Teflon Super-Seal inserts and the borosilicate sight tubing are exposed to process fluids. Once they are installed, they do not have to be removed and disassembled for inspection or cleaning. Standard shields are epoxy-coated carbon steel.
  • SuperSeal inserts for permanent, stress-free sealing
    All Jogler flow indicators incorporate patented PTFE Teflon Super-Seal inserts, which seal on the outside diameter, not the ends, of the sight tube. Since the tube is free to move within the Super-Seal without leaking, stresses caused by differential expansion between the sight tube and the housing are eliminated. There are no elastomer seals or o-rings to inspect and replace: Super-Seal inserts last the life of the sight tubing.
  • Wide range of sizes
    Jogler flow indicators are available in diameters up to 8 inches. Standard lengths are 8 and 12 inches; lengths up to 72 inches are available.
  • Jogler Quality Program
    Jogler flow indicators are quality ensured to exceed performance requirements with maintenance-free service. JoglerÌs Quality Program (JQP) is based on national (ANSI/ASQC) and international (ISO 9001) guidelines. The JQP monitors product quality and preserves material traceability. Systematic reviews of vendors, materials, processes, aand product construction are consistently evaluated by management for improvement through technical innovation.
  • Factory Mutual approved
    All Jogler flow indicators are approved by the Factory Mutual System.
  • Easy installation
    Jogler flow indicators are shipped fully assembled for easy installation.
  • Options and accessories
    Many options and accessories are available:
  • Sanitary fittings
    Custom designs
    PTFE Teflon® drip-tube
    Models for all applications
  • General service at or near ambient temperatures:
    Model FS Single Tube, Armored
    Model LAS Single Tube, Lantern
  • Cryogenic or hot process conditions:
    Model FT Tube-N-Tube, Armored
    Model LAT Tube-N-Tube, Lantern
  • Corrosive, viscous, or sanitary service:
    Model UFSS Single Tube, Teflon-Lined, Armored
    Model ULAS Single Tube, Teflon-Lined, Lantern
  • Corrosive, viscous, or cryogenic or sanitary service at hot process conditions:
    Model UFTS Tube-N-Tube, Teflon-Lined, Armored
    Model ULAT Tube-N-Tube, Teflon-Lined, Lantern

For the Jogler Web Site Click Here